210-065 Real Exam Dumps Questions and answers 21-30
Get Full Version of the Exam
http://www.EnsurePass.com/210-065.html
Question No.21
Which option is the embedded component that enables endpoints and collaboration applications to support medianet functionality?
|
A. |
Media Services Interface |
|
B. |
Open API |
|
C. |
XMPP |
|
D. |
SNMP |
|
E. |
Medianet Agent |
|
F. |
SDN |
Correct Answer: A
Question No.22
Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three.)
|
A. |
automatic software update and release keys |
|
B. |
intelligent call routing engine |
|
C. |
provisioning a Cisco TelePresence System endpoint |
|
D. |
tracing SIP and H.323 calls |
|
E. |
managing phonebooks for endpoints that are registered to the Cisco Unified Cisco Unified Communications Manager |
|
F. |
rebooting endpoints that are registered to the Cisco TelePresence Video Communications Server |
Correct Answer: ABF
Question No.23
Which CLI command must be used to configure the network settings on a Cisco TelePresence 4500 MCU?
|
A. |
Static A lt;IP addressgt; lt;netmaskgt; [lt;default gateway addressgt;] |
|
B. |
Network iplt;ip addressgt;lt;netmaskgt;lt;default gatewaygt;lt;DNS server addressgt; |
|
C. |
Xconfig network addresslt;ip addressgt;lt;netmaskgt;lt;default gatewaygt; |
|
D. |
Xconfig network addresslt;ip addressgt;lt;netmaskgt;lt;default gatewaygt;lt;DNS server addressgt; |
Correct Answer: A
Question No.24
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which two steps are required as part of this process? (Choose two.)
|
A. |
Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20. |
|
B. |
Connect the Touch 8 controller to the power adapter and connect the adapter to the network. |
|
C. |
Connect the Touch 8 controller to the secondary network adapter on the Cisco TelePresence SX20. |
|
D. |
Reboot the Cisco TelePresence SX20. |
|
E. |
Hold the mute button down for 20 seconds while you power on the Touch 8 controller. |
Correct Answer: CE
Question No.25
Which two methods can be used to retrieve the status of a Cisco TelePresence codec endpoint? (Choose two.)
|
A. |
From the codec web GUI, choose Troubleshooting gt; System Status. |
|
B. |
From the codec web GUI, choose Diagnostics gt; System Status. |
|
C. |
From the codec web GUI, choose Configuration gt; System Status. |
|
D. |
Run the xstatus command from the CLI. |
|
E. |
Run the xcommand status command from the CLI. |
Correct Answer: CD
Question No.26
The user of a Cisco TelePresence MX300 wants to control the far-end camera of any video conference participant. Which control device and function is used to control the far-end camera?
|
A. |
Navigate using the TRC5 Remote Control arrow keys. |
|
B. |
Tap on the image of one of the participants using touch control. |
|
C. |
Use the Touch Control Conference functions. |
|
D. |
Use the TRC5 Remote Control home key. |
Correct Answer: B
Question No.27
Which statement is correct regarding the difference between Multisite and Multiway conferencing?
|
A. |
Multisite requires configuration on the endpoint, whereas Multiway requires the Multiway options key to be installed. |
|
B. |
Multisite requires the presence of a multipoint control unit, whereas Multiway relies on the endpoint conferencing capability. |
|
C. |
Multisite is used to conference in multiple sites, whereas Multiway is intrasite multipoint conferencing. |
|
D. |
Multisite requires the Multisite options key to be installed and configured at the endpoint, whereas Multiway requires a Cisco TelePresence Video Communications Server and a centralized multipoint control unit. |
Correct Answer: D
Question No.28
A customer wants a Cisco TelePresence MCU solution that supports up to 40 FullHD 1080p sessions. Which solution should the customer use?
|
A. |
a stack of Cisco TelePresence MCU 5320s |
|
B. |
a stack of Cisco TelePresence MCU 4520s |
|
C. |
a Cisco TelePresence MSE 8000 with clustered Cisco TelePresence MCU MSE 8420s |
|
D. |
a Cisco TelePresence MSE 8000 with clustered Cisco TelePresence MCU MSE 8510s |
Correct Answer: D
Question No.29
Which command returns the Cisco VCS to its factory default settings?
|
A. |
write erase |
|
B. |
factory-default |
|
C. |
xCommand SystemUnit FactoryReset Confirm: Yes |
|
D. |
utils SystemUnit FactoryReset Confim: Yes |
|
E. |
factory-reset |
Correct Answer: E
Question No.30
An engineer is configuring a Cisco TelePresence System endpoint for use with a maximum of six people in the room. Which table type should be configured when setting up cameras where two participants directly face the endpoint display?
|
A. |
short racetrack |
|
B. |
long racetrack |
|
C. |
short rectangle |
|
D. |
long rectangle |
Correct Answer: A
Get Full Version of 210-065 Dumps