[Free] 2018(June) Ensurepass Microsoft 70-680 Dumps with VCE and PDF 101-110

Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-680
100% Free Download! 100% Pass Guaranteed!

TS: Windows 7, Configuring

Question No: 101 – (Topic 2)

Which of the following Windows 7 utilities was used to create the output in the above figure?

Not the real exhibit (exhibit):

Ensurepass 2018 PDF and VCE

German Output (exhibit):

Ensurepass 2018 PDF and VCE

  1. MemManager.exe

  2. SysPrep.exe

  3. Cipher.exe

  4. Performance Monitor

Answer: C

Question No: 102 – (Topic 2)

You have a computer that runs Windows 7.

You perform regular data backups and system image backups. The computer experiences a hard disk failure. You replace the failed hard disk.

You need to recover the computer to the previous Windows 7 environment. You start the computer from the Windows 7 installation media.

Which recover option should you select?

  1. Command Prompt

  2. Startup Repair

  3. System Image Recovery

  4. System Restore

Answer: C Explanation:

System Image Recovery Enables you to implement a System Image restore. You would choose this option if your hard disk failed or needed to be wiped. If system changes are causing problems, you would choose the System Restore option.NOT Startup Repair Automatically fixes problems that prevent Windows from starting. If Windows 7 had boot problems during a previous restart, a normal boot (without accessing the Advanced Boot dialog box) gives you the option of selecting Startup Repair.NOT System Restore Gives you another method of starting a system restore to a previous restore point. Because you can access this menu when you boot from a DVD-ROM, this lets you repair your system when recent changes to system settings prevent your computer from booting normally.NOT Command Prompt Gives access to the file system, volumes, and files through a command- line interface.

Question No: 103 – (Topic 2)

You have a computer that runs windows 7.

You have an application installation package named app1.msi. You need to perform a customized installation of app1.msi.

What should you do?

  1. Create a transform file named app1.mst and then run Msiexec.exe /i app1.msi /t app1.mst.

  2. Create a transform file named app1.mst and then run Msinfo.exe /I app1.msi /t.

  3. Create a transform file named app1.msp and then run Msiexec.exe /I app1.msi /app1.

  4. Create a transform file named app1.msp and then run Msinfo32.exe /I app1.mst /.

Answer: A Explanation:

Windows Installer Transform Files

A Windows Installer transform (.mst) file provides configuration settings for a customized installation. A transform file contains information about components, features, setup

properties, and changes that you can use to customize your installation.

MsiexecProvides the means to install, modify, and perform operations on Windows Installer from the command line. To install or configure a product Syntax msiexec /i

{package|ProductCode} /i: Installs or configures a product. /t : Applies transform to advertised package.NOT Msinfo32

Displays a comprehensive view of your hardware, system components, and software environment.

Question No: 104 – (Topic 2)

Which of the following steps will keep a Microsoft Word shortcut icon on the Taskbar after the next reboot?

  1. Copy and paste a Microsoft Word icon to the Taskbar.

  2. Right click on the Microsoft Word icon and choose, “Staple to Superbar”.

  3. Right click on the Microsoft Word icon and choose, quot;Pin this programm to taskbarquot;.

  4. Open Microsoft Word. While the Icon is on the Taskbar, right click the icon and choose, “Pin this program to taskbar”.

Answer: D

Question No: 105 – (Topic 2)

You have two computers that run Windows 7. Both computers are connected to a network and have IP addresses within the subnet.

You need to ensure that both computers can join a HomeGroup. What should you do?

  1. Enable network discovery.

  2. Set the network location to Home network.

  3. Configure Windows Firewall to allow the Netlogon service.

  4. Change the IP addresses to be within the subnet.

Answer: B Explanation:

Windows Firewall does not allow you to create firewall rules for specific network locations on the basis of port address. Windows Firewall does not allow you to create rules that differentiate between the home and work network locations. You can only create rules that differentiate on the basis of home and work or public network locations.HomeGroup ConnectionsThis option decides how authentication works for connections to HomeGroup resources. If all computers in the HomeGroup have the same user name and passwords configured, you can set this option to allow Windows to manage HomeGroup connections. If different user accounts and passwords are present, you should configure the option to use user accounts and passwords to connect to other computers. This option is available only in the Home/Work network profile.

Question No: 106 – (Topic 2)

You need to increase the size of a paging file. What should you do?

  1. From Disk Management, shrink the boot partition.

  2. From Disk Management, shrink the system partition.

  3. From System, modify the Advanced system settings.

  4. From System, modify the System protection settings.

    Answer: C Explanation:

    1. Click Start, right-click My Computer, and then click Properties.

    2. In the System Properties dialog box, click the Advanced tab.

    3. In the Performance pane, click Settings.

    4. In the Performance Options dialog box, click the Advanced tab.

    5. In the Virtual memory pane, click Change.

    6. Change the Initial size value and the Maximum size value to a higher value, click Set, and then click OK.

    7. Click OK to close the Performance Options dialog box, and then click OK to close the System Properties dialog box.

      Ensurepass 2018 PDF and VCE

      Ensurepass 2018 PDF and VCE

      Adjusting Paging File SizeFor virtual-memory support, Windows 2000 creates one paging file called Pagefile.sys on the disk or volume on which the operating system is installed.

      The default size is equal to 1.5 times the amount of physical memory. A small paging file limits what can be stored and might exhaust your virtual memory for applications. If you are short on RAM, more paging occurs, which generates extra activity for your disks and slows response times for the system.Expand the Default SizeExpanding the default size of the paging file can increase performance if applications are consuming virtual memory and the full capacity of the existing file is being used. To determine how large your paging file should be based on your system workload, monitor the Process (_Total)\Page File Bytes counter. This indicates, in bytes, how much of the paging file is being used. A large paging file uses disk storage space, so do not create a large paging file on a disk that is very active (for example, one that services heavy application or network activity) or one that has

      limited space. Change the file size gradually and test performance until you find the optimal balance between paging file and disk space usage. The operating system requires a minimum of 5 MB of free space on a disk. For more information, see quot;Examining and Tuning Disk Performancequot; in this book. Before increasing the file size, make sure you have adequate disk space, particularly on your servers.

      Question No: 107 – (Topic 2)

      You have a portable computer named Computer1 and a desktop computer named Computer2. Both computers run windows 7.

      On computer2, you create a share named Share1 by using Advanced Sharing feature.

      You need to ensure that when you connect to Share1 from Computer1, the files that you open are automatically cached.

      What should you do?

      1. On Computer1, modify the Offline Files settings.

      2. On Computer1, modify the User Profile settings.

      3. On Computer2, modify the properties of Share1.

      4. On Computer2, modify the file sharing connection settings for the HomeGroup

        Answer: C Explanation:

        The caching feature of Shared Folders ensures that users have access to shared files even when they are working offline without access to the network. You can also use Shared Folders or Share and Storage Management to enable BranchCache on shared resources. The BranchCache feature in Windows庐 7 or Windows Server 2008 R2 enables computers in a branch office to cache files downloaded from this shared folder, and then securely serve the files to other computers in the branch.

        To set caching options for a shared folder by using the Windows interface

        1. Open Computer Management.2. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.3. In the console tree, click System Tools, click Shared Folders, and then click Shares.4. In the results pane, right-click the shared folder, and then click Properties.5. On the General tab, click Offline Settings, configure the offline availability options as appropriate and then click OK.

          Offline availability optionsSelect the following offline availability option for each shared folder:

          Ensurepass 2018 PDF and VCE

          All files and programs that users open from the share are automatically available offlineWhenever a user accesses the shared folder or volume and opens a file or program in it, that file or program will be automatically made available offline to that user. Files and programs that are automatically made available offline will remain in the Offline Files cache and synchronize with the version on the server until the cache is full or the user deletes the files. Files and programs that are not opened are not available offline.

          Question No: 108 – (Topic 2)

          You have a computer that runs Windows 7. The computer#39;s disk is configured as shown in the exhibit. (Click the Exhibit button.)

          Ensurepass 2018 PDF and VCE

          You need to extend volume C. What should you do first?

          1. Back up and delete volume D.

          2. Convert disk 0 to a dynamic disk.

          3. Remove the crash dump from volume C.

          4. Move the paging file from volume C to volume E.

Answer: A Explanation:

Extend a Basic Volume

You can add more space to existing primary partitions and logical drives by extending them into adjacent unallocated space on the same disk. To extend a basic volume, it must be raw or formatted with the NTFS file system. You can extend a logical drive within contiguous free space in the extended partition that contains it. If you extend a logical drive beyond the free space available in the extended partition, the extended partition grows to contain the logical drive. For logical drives, boot, or system volumes, you can extend the volume only into contiguous space and only if the disk can be upgraded to a dynamic disk. For other volumes, you can extend the volume into noncontiguous space, but you will be prompted to convert the disk to dynamic.

Question No: 109 – (Topic 2)

You have a customized image of Windows 7 Professional.

You need to create a new unattended file to automate the deployment of the image. You must achieve this goal by using the minimum amount of administrative effort.

What should you do first?

  1. Run Imagex.exe and specify the /mount parameter.

  2. Run Dism.exe and specify the /mount-WIM parameter.

  3. From Microsoft Deployment Toolkit (MDT), add the custom Windows image (WIM).

  4. From Windows System Image Manager (Windows SIM), open the custom Windows image (WIM).

Answer: D Explanation:

Windows SIMOpens Windows images, creates answer files, and manages distribution shares and configuration sets.NOT DismDeployment Image Servicing and Management (DISM) is a command-line tool used to service Windows庐 images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system.NOT ImagexImageX is a

command-line tool that enables original equipment manufacturers (OEMs) and corporations to capture, to modify, and to apply file-based disk images for rapid deployment. ImageX works with Windows image (.wim) files for copying to a network, or it can work with other technologies that use .wim images, such as Windows Setup, Windows Deployment Services (Windows DS), and the System Management Server (SMS) Operating System Feature Deployment Pack./mountMounts a .wim file from Windows XP with Service Pack 2 (SP2), Windows Server 2003 with Service Pack 1 (SP1), or Windows Vista with read-only permission to a specified directory. Once the file is mounted, you may view, but not modify, all the information contained in the directory.NOT MDT MDT 2010 is the Microsoft solution accelerator for operating system and application deployment and offers flexible driver management, optimized transaction processing, and access to distribution shares from any location. You can use the MDT on imaging and deployment servers to implement the automatic deployment of Windows 7 (for example) on client computers. It is possible to run MDT 2010 on a client running Windows 7, but in practice it would typically run from a distribution server running Windows Server 2008. The MDT provides detailed guidance and job aids and offers a common deployment console that

contains unified tools and processes that you can use for client and server deployment. The toolkit offers standardized desktop and server images, along with improved security and ongoing configuration management.

Question No: 110 – (Topic 2)

You have a computer that runs Windows 7. Multiple users log on to the computer. The computer has five removable devices.

You need to ensure that users can only access removable devices that have been previously installed on the computer.

What should you modify in the Local Group Policy?

  1. Enable the Prevent redirection of USB devices setting.

  2. Enable the Prevent installation of removable devices setting.

  3. Disable the WPD Devices: Deny read access setting.

  4. Disable the Allow administrators to override Device Installation Restriction policies setting.

Answer: B Explanation:

Prevent installation of removable devices

This policy setting allows you to prevent Windows from installing removable devices. A device is considered removable when the driver for the device to which it is connected indicates that the device is removable. For example, a Universal Serial Bus (USB) device is reported to be removable by the drivers for the USB hub to which the device is connected. This policy setting takes precedence over any other policy setting that allows Windows to install a device. If you enable this policy setting, Windows is prevented from installing removable devices and existing removable devices cannot have their drivers updated. If you enable this policy setting on a remote desktop server, the policy setting affects redirection of removable devices from a remote desktop client to the remote desktop server. If you disable or do not configure this policy setting, Windows can install and update device drivers for removable devices as allowed or prevented by other policy settings.

NOT Prevent redirection of USB devicesThis policy setting prevents redirection of USB devices. If you enable this setting, an alternate driver for USB devices cannot be loaded. If you disable or do not configure this setting, an alternate driver for USB devices can be


100% Ensurepass Free Download!
Download Free Demo:70-680 Demo PDF
100% Ensurepass Free Guaranteed!
70-680 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No
Tagged , , , , , , , , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *