Network switch explained

Just like hubs and bridges, a switch is used to connect multiple hosts together, but it has many advantages over them. Switch is an OSI Layer 2 device, which means that it can inspect received traffic and make forwarding decisions. Each port on a switch is a separate collision domain and can run in a full duplex mode (photo credit: Wikipedia).

Cisco switch

A switch manages the flow of data across a network by inspecting the incoming frame’s destination MAC address and forwarding the frame only to the host for which the data was intended. Each switch has a dynamic table (called the MAC address table) that maps MAC addresses to ports. With this information, a switch can identify which system is sitting on which port and where to send the received frame.

To better understand how a switch works, consider the following example:

Network switch explanation

As you can see from teh example above, Host A is trying to communicate with Host C and sends a packet with the Host C’s destination MAC address. The packet arrives at the switch, which looks at the destination MAC address. The switch then searches that MAC address in its MAC address table. If the MAC address is found, the switch then forwards the packet only out the port connected to the frame’s destination. Hosts connected to other ports will not receive the frame.

Get the Latest Full Version 200-301 Dumps