As we’ve mentioned before, all working interfaces on the root switch are placed in forwarding state. All other switches (called nonroot switches) determine the best path to get to the root switch and the port used to reach the root switch is placed in forwarding state. The best path is the one with the lowest cost to reach the root switch. The cost is calculated by adding the individual port costs along the path from the switch to the root.
Take a look the following example:
SW1 has won the election process and is the root switch. Consider the SW3’s perspective for choosing its root port. Two paths are available to reach the root switch, one direct path over Fa0/1 and the other going out Fa0/2 and through SW2. The direct path has a cost of 19, while the indirect path has the cost of 38 (19+19). That is why Fa0/1 will become the root port on SW3.
In case the best root cost ties for two or more paths, the following tiebreakers are applied:
- the lowest neighbor bridge ID
- the lowest neighbor port priority
- the lowest neighbor internal port number
The default port cost is defined by the operating speed of the interface:
You can override the default value on the per-interface basis using the following command:
(config-if)#spanning-tree cost VALUE
Prerequisites for 200-301
200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.
The recommended training program that can be taken at a Cisco academy is called Implementing and Administering Cisco Solutions (CCNA). The successful completion of a training course will get you a training badge.
Full Version 200-301 Dumps